The Best Ebike Rack For Rv of 2023: The 10 Top Rated Products

EASY TO ASSEMBLE & USE: Sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!

KEEPS YOUR BIKE STABLE: Sturdy design with adjustable, padded hooks that hold the bikes in place so you have peace of mind knowing they will stay put

RV APPROVED: RV's put more strain on a bicycle rack compared to a regular car, thankfully our RV approved racks have been built to withstand these conditions

WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with a locking hitch pin & cable that are included

VERSATILE: Easily transports up to 2 bikes and is compatible with a 2" hitch receiver. Maximum weight capacity of 45Ibs. per bike

The new RV Rider carries 2 E-bikes (up to 80 lbs. each) on the back of an RV Motorhome, a 5th wheel or a flat towed vehicle.

Special features include extra heavy duty wheel holders for heavy load carrying capacity. Locking frame grabbers secure the bikes in place. The frame grabbers can attached to a bikes frame or seat tube with a diameter range of 1"- 2".

A locking cable and keyed alike hitch pin secure the bikes to rack and the rack to the vehicle. The bike rack folds up when not in use and can tilt down for rear cargo access when the bikes are not mounted (when used on an RV or motorhome).

A double walled receiver tube handles the extra weight of the electric bikes. An included hitch tightener reduces motion inside the hitch (receiver hitch must have a flange).

A minimum class 3 2" trailer hitch is required to use this bike rack. A minimum class 3 trailer hitch is required to use this bike rack. A minimum class 3 trailer hitch is required to use this bike rack.

VERSATILITY - The Jack-It mounts over the tongue jack and attaches directly to you A-Frame trailer

MORE SPACE - Frees up space for additional cargo on the rear of the trailer where bikes are typically stored

ENHANCED STABILITY - The Jack-It allows you to carry your bikes on the front of your trailer, where there is the least bounce

PROTECTS BIKES - Foam bumpers and the new SwayControl system enhance the rack’s natural stability and protects the bicycle finish

SECURITY - NoMotion pins minimize wobble and can be padlocked for security

EXCLUSIVE DESIGN FOR RV: This model features a strengthened hitch mount designed carrier to fit Class 3 or higher hitch receivers (front and/or back), giving you extra safety on the road. Please note that hitch receivers must be CHASSIS MOUNTED. Mount the hitch rack to BUMPER MOUNTED HITCH RECEIVER may lead to bumper tearing off and result in SERIOUS DAMAGE to the RV and even DEADLY INJURY. Caution: Due to tight space, please do not install the Volt RV between front vehicle and the trailer.

140 LB TOTAL CAPACITY: Supports up to 70 pounds per rack, our rack is compatible with mountain bikes, electric bikes, road bikes with up to 5-inch fat tires, and up to 58-inch wheelbase. For step thru or lady bikes, bike adapter required (not included)

SAFE AND SECURE: Comes with co-injected soft rubberized ratcheting hooks that secure the frame of your bike in place without scratching the metal surface. Featuring dual key locks to prevent bikes and bike rack from being stolen. Adjustable wheel holders allow you to easily accommodate bikes of different sizes. Tighten the wheels with reflective velcro straps that help improve visibility in the dark. Additional security straps included, ensuring your bike stays firmly on the rack

CARRYING HANDLE / INTEGRATED WALL MOUNT: When the rack is fully removed from the vehicle and folded up, simply grab the carrying handle to easily move the rack around. The integrated storage hook allows you to hang the rack on the wall, saving you valuable space

FITS 2 INCH HITCH RECEIVER: Works with vehicles with 2-inch class 3 receivers and above. Secured by an anti-wobble ½ inch steel pin and a key lockset (Patent pending), the rack is sturdy and built to last.

TIRE TRAY LIMITATION: FIT 20" TO 29" WHEELS, AND 1" TO 5" TIRE WIDTH

RV APPROVED: The TRAVELER XC2 works well with various sizes of trailers & campers

EASY TO ASSEMBLE: Only takes a few minutes to assemble following the instructions.

CONVENIENT: Once installed, simply load your bikes and you are ready to go! When not in use you can fold the upright bar down to give access to the rear of the RV

STURDY: The light but sturdy design keeps your bikes in place, even on the those long journeys!

VERSATILE: Easily transports up to 2 bicycles and is compatible with a 2" Class 3 hitch receiver or mounts to a 4.5" continuous steel welded RV Bumper Adapter. Also comes with a 2" Bumper Adapter.

EBIKE APPROVED: The CURRENT hitch mount bike rack is designed for all types of bikes including fat bikes, eBike and nearly everything in between

EASY TO ASSEMBLE: Sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!

CONVENIENT: Even with bikes loaded the rack can tilt away from the vehicle allowing for easy access. When not in use, the rack easily folds against the rear of the vehicle for easy access to the trunk

VERSATILE: Easily transports up to 2 bikes and is compatible with Class 2 or higher, 1-1/4" and 2" hitch receivers. Fits most frame sizes, shapes and styles as well as fits 5" wide tire sizes. Maximum weight capacity of 60Ibs. per bike.

WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with locking ratchet hooks and locking hitch pin

Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)

Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper

Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion

Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing

Simple to use and supports various bike sizes, frames and wheels

Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)

Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper

Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion

Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing

Simple to use and supports various bike sizes, frames and wheels

Carries up to 2 bikes

Mounts around most spare tires

Anti-sway cradles prevent bike-to-bike contact

Attaches to a 4" - 4-1/2" continuously welded steel bumper

All hardware is included for attachment to bumper and carrying the bike

👍🏻SAFE AND SECURE: Comes with soft padded hooks and locking hitch pin, that secure your bikes in place without swaying and scratching the paint. Slide down over the vertical frame with hitch tightener to fit different size bike frame for safe. With rear Safety Reflector to enhance the visibility in the dark.

👍🏻FOLDABLE & TILT BACK DESIGN: Users can fold up this rack to save space when not in use, convenient for garage parking. Quick release tilting down feature allows easy access to trunk without detaching the hitch rack.

👍🏻200 LB TOTAL CAPACITY: Easily transports up to 100 pounds per bike. Universal tire holders and wheel straps are compatible with mountain bikes, road bikes with up to 5-inch fat tires and 20" to 29" tire sizes.

👍🏻DESIGN FOR RV. WARNING❗❗ - DO NOT exceed 120 lbs of capacity when installed behind a RV. DO NOT use this bike carrier for transporting or carrying other items or materials besides bicycles.

👍🏻2 INCH HITCH RECEIVER: ONLY fits vehicles with 2" receivers, the rack is sturdy and does not wobble easily. Most parts come pre-assembled for easy installation. Parts including locking hitch pins, instruction manual and hardwares.

👍🏻1 YEAR WARRANTY: If anything ever goes wrong with your hitch mounted bike rack , please contact our 24H Service Team.